A Simple Frame & Panel
Articles | Blog

A Simple Frame & Panel

– The Wood Whisperer is sponsored by Powermatic and Titebond. (soulful funky music) You know, one of my biggest challenges these days is making enough content. Right, I make tons of stuff in the Wood Whisperer Guild. But that’s all behind a pay wall, so not everyone can see it, and I don’t always have […]

Continue Reading...

CNC made chessboard frame
Articles | Blog

CNC made chessboard frame

Once I made very big chessboard, 3 inch square Now I have to make the similar board Usually I made a moulding of the base with the use of the shaper I am going to make new frame with the use of CNC machine I will make big base of the board, then will make […]

Continue Reading...

Making a Picture Frame
Articles | Blog

Making a Picture Frame

In the previous video, we made this miter sled for the table saw. Now we’re going to put it to use and make some picture frames. First I cut down the thicker strips of walnut that would make the inside of the frame. Then I cut thin strips of walnut and maple I glued together […]

Continue Reading...

Making a workbench frame
Articles | Blog

Making a workbench frame

In this video I make a sturdy workbench frame. The first thing to do is to check that our circular saw guide is still at 90 degrees. If needed we remove one screw and then we adjust the guide again. We measure the length of the legs. And with the circular saw and the jig […]

Continue Reading...